Cadenza R29P Small 10 Channels Medical RIC Hearing Aids
- 10 Channels
- 12 Bands
- 18dB Noise Reduction
- How To Wear
- Hearing aid warranty
Non-programmable and Receiver In Canal RIC style
Battery: Zinc-Air battery 312A
It can be sold at super markets, pharmacy shops, online shops and hearing clinics etc.
Full Frequency Noise Reduction
R29 Ear Dome: OUL/OUM/OUS/CDM/CDS/CDL
R29P Ear Dome: CDM/CDS/CDL
a.Installing RIC Hearing Aid Battery
1. Check whether the battery type is correct or not (Battery size:312).
2. Remove the tag on the battery and keep it in the air at least 1 minute.
3. Open the battery door gently.
4.Use the brush's magnet to hold the battery positive and then insert the battery. Should avoid touching battery by hand directly. Brush flat move to the direction of the battery door to separate the battery
and brush, then close the battery door.
5.Gently close the battery door.
Power On: Close the battery door.
Power Off: Open the battery door.c.Removing Battery
Open the battery door gently by your fingernail. After the battery door is fully opened, use the brush's magnet to hold the battery, and then take out the battery. Do not take out the battery directly by hand .
d. How To Wear RIC Hearing Aid?
1. Eartip Assembly
Choose the appropriate size of eartip and insert it into the connector on tube.
2. Steps for Wearing Hearing Aid
Use fingers to hold the bottom of the sound tube and push the eartip into the canal gently.
Use another hand to pull the auricle backward, rotating the eartip until it reach the right position.
Put the hearing aid behind the ear and closed to the head, hung on the ear properly.
e.Removing the Hearing Aid
Remove the hearing aid from the back of the ear.
Hold the bottom of the sound tube and pull gently, take out the ear mold or eartip when loosen.
f.Push-Switch (Multi function)
* The multi-function toggle-switch can be used to change volume and program with memory function.
* Steps for Volume Control and Program Switch: Short push for Volume Control and long push 2 seconds for Program Switch.
* Volume Control
In different environments, you can short push the up and down button to adjust the volume to the maximum comfort level.
Short push the up button to increase the volume.
Short push the down button to decrease the volume.
For the switch of each volume step, you will hear one beep.
When the volume is at the Max or Min level, you will hear three beeps.
* Program Switch
Long push the up button(≥2s) to change the program from Program 1 to 2 to 3...
Long push the down button (≥2s) to change the program from Program 3 to 2 to 1...
The hearing aid comes with memory functions for program and volume.
When reset the device, hearing aid will keep the volume and program last time you set.
g.How to Use the Tele-coil Program (Available for the device with tele-coil)
Switch the program into the tele-coil, move the telephone receiver close to the hearing aid, slowly move the receiver to find the position for a clear hearing of the call. After the call, please switch the program back to microphone mode.
Here about the Cadenza R29P RIC Hearing Aids Warranty
a)Range For Free WarrantyFor all devices manufactured by Austar, the failures caused by non-human factors will enjoy free warranty from the date of purchase.
b) The Warranty Period
Check the warranty period on the warranty card.
c) Any of the Following Circumstances Does Not Belong to the Scope of Free Warranty
The damage caused by incorrect use or improper operation.
The damage caused by disassembling or assembling the hearing aid.
The damage caused by irresistible reason (Floods, fires, earthquakes, etc.).
Change the hearing aid model or serial number on the warranty card without permission.
No warranty card.