Fugue 12 Channels BTE U Hearing Aids With Computer Control
- 12 Channel
- 16 Bands
- 3 Program
- Technical Specifications
- Steps for Wearing
12 Multi-channels Expansion
Normal CASA Noise Reduction Manager
New 5th Generation Intelligent Multi-Modal Feedback Handling System
High Precision Target Algorithm : 6 types
Fitting Record Sharing
|Technical Specifications||U BTE||P BTE||SP BTE|
|Frequency Range F1,F2||F1≤200Hz, F2≥5351Hz||F1≤200Hz, F2≥5720Hz||F1≤200Hz, F2≥5320Hz|
|THD at 500Hz||0.30%||1.30%||1.20%|
|THD at 800Hz||0.20%||0.80%||0.30%|
|THD at 1600Hz||0.20%||0.20%||0.30%|
|Eq.Input Noise Level||23.5||26.5||25.9|
|Battery Current Drain||0.85||0.96||1.82|
A. Tube confirmed
1.The earplugs, elbows, and sound tube are connected in place, and put the earplug to ear canal correctly.
2.Place the hearing aid on the auricle closely.
3.Compare the length of the connection between tube and ear hook, reserve 2 or 3mm, and cut off the excess.
4.Connect the tube and ear hook.
B. Installing battery
1.Choose 13A battery.
2.Use your fingernail to gently rub the battery door.
3.Remove the label and put in the air for at least 2 minutes.
4.Insert the battery, and make sure the positive and negative pole. "+" sign on the battery should be at the same side as "+" on the battery door.
5.Close the battery gently.
C. Remove battery
Hold down the battery corner gently with your fingers to open the battery door. Remove the battery after battery door fully opened.
D. Power on/off
1.Power on：When the battery door is fully closed.
2.Power Off：When the battery door is open.
E. How To Wear 12 Channels BTE U Hearing Aids With Computer Control
Pinch the bottom of tube with your fingers and gently push the ear dome into the ear canal.
Use another hand to pull the auricle back and rotate the ear dome (or ear mold) until it is in place.
Place the hearing aid behind the ear and close to the head, and the ear hook hang on the auricle comfortably.
F. Remove hearing aid
1.Remove the hearing aid from the back of the ear.
2.Pinch the bottom of tube and gently pull it, and remove the ear dome with the hearing aid after it is loose.