Connect Austar Hearing Aid To Computer

2020-04-27

How to connect Austar hearing aid to computer? There are 7 steps for you to do  the hearing aids fitting process.

First Step:
1.Pls install the hearing aid fitting software in your computer successfully
according to “Indicate”
2.Pls join the hearing aid with hearing aid programmer and computer
together:
2.1 Pls make the hearing aid to connect with program cable successfully
according to below photo shows:
BTE type:

RIC&OE type:

CIC Type

2.2 Pls connect program cable with hearing aid programmer successfully.
Kindly explain that pls choose right programmer port for hearing aid
fitting:
Color BLUE for Left; Color RED for Right ear.

Kindly explain that the hearing aid will be whistle when the hearing aid
joined with hearing aid programmer successfully

Second Step
Pls open the fitting software from computer after fitting software has
been installed into computer successfully.
When we do hearing aid fitting for new user, we need to input client's
name and audiogram into fitting software:
1.Pls click "Client" to input user's name and audiogram completely.
1.1 Input user's Name and click "OK":

1.2 Input user's Audiogram and click "Save":

2.Pls click "Save" to save all user's info into fitting software successfully.

Kindly explain that:
Now, the user's info has been created a data file to save in your
computer auto.

Third Step
Pls click "Option" and choose "Hipro Test" to check the hearing aid
programmer is working well.
Pls click "Test ", and then, test result should be "OK"
Pls see below photo shows:

Fourth Step
Pls choose "Detect" for 2 times to detect hearing aid through hearing aid
programmer. If hearing aid is used for Left ear, you just need to choose
"Left Ear" to do detect.
After hearing aid has been detected successfully through hearing aid
programmer, pls click "Go Fitting" to do hearing aid fitting and adjust:

Fifth Step
For hearing aid fitting, pls click "Connect" to confirm hearing aid connect
with computer and fitting software well.
After fitting , pls click "Save" to save your fitting data and function into
hearing aid hybrid auto.
1.Pls click "Connect" to make hearing aid connect with computer and
software well:

2. Pls click "Autofit" firstly, this function mean that fitting software will
calculate user's audiogram and change the sound quality to user's
demand auto,

3. If the sound quality is not good after "Autofit", pls click "Advisor", this
function will provide different hearing aid adjust suggestions according
to your feeling:

4.Pls change MPO, Low Cut, High Cut, Volume according to Advisor's
suggestions:

5.You can do adjust for each program according to demand freely;
For example: Pls choose Program "A" firstly, and then, pls use computer
mouse's right button to click Program A, here will come out a menu, pls
choose "Basic". That means Program A is used for daily use.
For other programs fitting, according to daily use demand, we suggest
you can adjust Program B to "Restaurant" or "Traffic", so, program B will
be used in noise environment; And, you can adjust Program C to
"Telecoil", so, program C is used for telephone function. Pls see below
photo shows:


5.1 And Pls click "Adv.Features" to set up Noise Reduction to 3/6/10 dB
according to daily demand

5.2 Pls choose "Gain" and make Tick on the "Extra VC" option.
That means user can adjust volume through hearing aid body button "+"
and "-"

Sixth Step:
After fitting, pls click "Save" to save fitting data and function into hearing
aid:
Kindly explain that:
1.You can do fitting for each program's function inside freely;
2.After you clicked "Save", fitting software will save all fitting data and
technology info into hearing aid auto;
3.At the same time, fitting software will create a data file to save the
fitting data and function choose into computer auto.
4. The data file will keep into your computer for ever unless you uninstall
the fitting software from your computer.

So, if you do fitting for hearing aid in the next time, after you connect the
hearing aid with computer well , fitting software will read the hearing
aid's hybrid record and will show out the last time fitting adjust data of
each inside program auto.

At last, pls note that:
1.If user doesn't like the fitting result in the second time, pls don't click
"Save" after fitting in the second time. Just need to click "Undo", so,
fitting software will back to the first time fitting record auto.
2.After your adjusted the hearing aid for user and saved the fitting data
into hearing aid at the first time, and then, user used the hearing aid for
some days, user come back and need to do some changes for hearing aid
inside function. Pls remark below items:
1.1 After user accepted the fitting sound quality for the second time , pls
save the record for user into hearing aid directly.
Now, the hearing aid's first time record has been covered by the second
time record auto in the computer.
When you will do fitting for the same user in the third time, the hearing
aid will show the second time record auto.

Seventh Step:
Audiometer Function introduction:
Pls click Audiometer, and then, pls click 500 Hz ‘s below button, this
button is used for indicate sound volume, if you want bigger volume,
pls click beside up button to increase the volume.
And then, click "Play " to make the sound to user when user is wearing
hearing aid. Pls click "Stop" button to stop sound;
About using, for example, when the 500 Hz the sound volume is 100
dB,pls click "play" to send sound to user, if the user hear the sound, pls
decrease the sound power till user can't hear, if the user can't hear the
sound, pls increase the sound power till user can hear. The sound power
is the user's hearing loss degree on 500 Hz. You can mark on the
audiogram. You can continue to do test on other frequency point.
At last, the user's audiogram comes out.

If you want dowload Austar Fitting software, pls check https://www.austar-hearing.net/Fitting+Software.html